Fiat 500 Clutch & transmission - Final drive
Model |
Part Number |
Description |
Price £ |
|||
| |
500F/L/R | TR0027 | Drive shaft 24mm | £26.34 | View | |
| |
500F/L/R | TR0028 | Drive shaft outer end drive flange for 24mm shaft | £10.74 | View | |
| |
500/126/600 | TR0028A | Drive shaft to hub flange, 24mm. Original Fiat Item | £32.34 | View | |
| |
500F/L | TR0028B | 500F/L Drive shaft flange 19mm | £45.54 | View | |
| |
500 | TR0029 | Replacement driveshaft set, with 24mm driveshafts. Direct replacement for either 19mm or 24mm driveshafts | £99.54 | View | |
| |
500/126 | TR0029B | Driveshaft pad | £11.94 | View | |
| |
500 | TR0030A | Drive shaft outer end C clip 19mm | £1.14 | View | |
| |
500 | TR0030B | Drive shaft outer end C clip 24mm | £1.14 | View | |
| |
500 | TR0031A | Pressure spring for thin type drive shaft | £2.10 | View | |
| |
500F/L/126 | TR0031B | Pressure spring for thick type drive shaft. One in the left in the photo, compared to one on the right for earlier cars | £2.10 | View | |
|
Special Offer!
|
500F | TR0032 | Drive shaft inner boot - thin shaft - 19mm | £8.34 | View | |
|
Special Offer!
|
500F/L/R/126 | TR0034 | Drive shaft inner boot - thick shaft - 24mm | £9.54 | View | |
| |
500N | TR0034A | Early driveshaft inner boot 17mm | £27.54 | View | |
| |
500/126/600 | TR0034HQ | High quality 24mm drive shaft inner gaiter | £17.94 | View | |
| |
500 | TR0035 | Rubber boot for outer drive shaft slide | £2.40 | View | |
| |
500N/D | TR0036 | Torsion damper for drive shaft - coarse pitch, item to the left is coarse pitch item to right is TR0037 with 18 teeth | £95.94 | View | |
| |
500D | TR0037 | Torsion damper for drive shaft - fine pitch | £155.94 | View | |
| |
500F/L/R/126 | TR0038 | Torsion damper for drive shaft | £26.34 | View | |
| |
500/126/600 | TR0038HQ | High quality torsion damper for driveshaft | £39.54 | View | |
| |
500/126/600 | TR0039 | C.V. Joint upgrade for Fiat 500, 126 and 600. Great upgrade for all cars and especially uprated cars, replaces the old torsion damper with a modern C.V. joint which is much stronger and puts less stress on the driveshafts. | £299.94 | View | |
| |
500D | TR0040 | Screw for out axle coupling set | £4.19 | View | |
| |
500F/L/R/126 | TR0040B | Screw for out axle coupling set | £3.54 | View | |
| |
500F/L/R/126 | TR0041 | Rear wheel bearing set (both sides) | £50.34 | View | |
| |
500F/L/R/126 | TR0042 | Rear wheel bearing set (1 side) | £26.34 | View | |
| |
500/126/600 | TR0042A | Rear bearing spacer | £3.54 | View | |
| |
500 | TR0043 | Rear wheel bearing castle nut with split pin | £5.94 | View | |
| |
500/126/600 | TR0043A | Rear hub/wheel bearing plain stake nut | £2.34 | View | |
| |
500/126/600 | TR0043B | Locking washer behind rear hub nut and torsion damper | £5.94 | View | |
| |
500 | TR0044 | Wheel bearing spacer ring | £5.94 | View | |
| |
500D/F/LR | TR0045 | Rear hub shaft | £107.94 | View | |
| |
500/126 | TR0045B | Rear hub bearing housing | £47.94 | View | |
| |
500/126/600 | TR0046 | Rear bearing hub to trailing arm caged bolts | £3.90 | View | |
